Contactless Test Switch for Combo Tester X3 & SmartLog Pro®

Designed to be used with the SmartLog Pro®, Combo Tester X3, and Combo Tester X3 Plus to test operators that wear ESD Footwear or dual-wire wrist straps

For all our customers who are concerned about controlling the spread of disease, we have introduced a contactless solution for testing footwear and wrist straps.
Desco Europe is introducing the 50756 Contactless Test Switch that can be used with the SmartLog Pro and Combo Tester X3 through the test fixture port, and sits next to the unit, either on a wall or turnstile, as shown in the images below. There is an infrared beam that runs in between the top and bottom portions of the Test Switch. Once the beam is broken the test will be performed.

Details
  • Contactless Test Switch
    Use with the SmartLog Pro® or Combo Tester X3 to test operators that wear foot grounders or dual-wire wrist straps
  • Infrared Activation Trigger
    Allows operators to initiate tests without touching any parts
Specification

Operating Voltage: 12 VDC
Operating Temperature: 41 to 85°F (5 to 30°C)
Environmental Requirements: Indoor use only at altitudes less than 6500 ft. (2 km). Maximum relative humidity of 80% up to 85°F (30°C) decreasing linearly to 50% @ 85°F (30°C)
Dimensions: 8.3″ L x 4.0″ W x 3.2″ H (210 mm x 102 mm x 81 mm)
Weight: 0.9 lbs. (0.4 kg)
Communication Cable Length: 2 ft. (610 mm)
Country of Origin: United States of America

Technical Bulletin

To download the technical bulletin please click here.

Video